3G100 Instructions

PAGE 1 2 3 4

OPERATING INSTRUCTIONS

Model # 3G100	Powerful yet fairly quiet with only a 79dB Noise rating. This economical, compact Airbrush Compressor will operate up to 4 airbrushes at the same time, giving years of maintenance free service. With its High 100 PSI output, it is also powerful enough to run Staplers, Brad Nailer, inflate Air Toys, etc.

	Quiet 79dB Noise Rating Oil Free Operation Powerful 1/4 HP / 6 Amps / 110V Auto ON/OFF Adjustable Air Regulator w/ Gauge / Separate Air Tank Gauge Moisture Filter with Drain .7 CFM @ 100 PSI Max. 2.95 Gallon Air Tank Light Weight - 18.8 lbs. / Fold Down Carrying Handle Compact 15-1/2" x 7-3/4" x 14-1/2"

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions may result in electric shock, fire, and or serious injury.

SAVE THESE INSTRUCTIONS.

ü Keep Work Area clean and well lighted.

ü DO NOT operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gasses, or dusty areas. Electrical tools can create sparks which may ignite the dust or fumes.

ü Keep Children away while operating your compressor.

ü Grounded tools must be plugged into a properly grounded outlet.

ü Do not expose to rain or wet conditions. Danger of electrical shock can occur if electrical equipment becomes wet.

ü If using an extension cord, be sure it is rated to carry the current compressor draws.

ü Be sure power switch is in the OFF position before plugging unit into electrical outlet.

ü NEVER direct compressed air at people or animals.

ü DO NOT alter or remove the factory sealed Pressure Relief Valve (part #3) Doing so can damage the compressor, and voids warranty.

ü Always wear ANSI approved eye protection.

ü Make sure Tools used with this air compressor do not exceed the volume of air this compressor produces. Excessive running of compressor, by attempting to run tools not meant to be used with this compressor, can cause compressor to over work and heat excessively, damaging the unit.

PAGE 1 2 3 4